Forum Discussion

guenniause's avatar
guenniause
Icon for New Contributor rankNew Contributor
6 years ago

Serial Flash Controller II - erase / program issue

On a customer board (Quartus Prime 18.1 / Cyclone 10 LP / W25Q64) I use the Serial Flash Controller II to access the serial flash W25Q64. Programming of the flash with JIC-file/Quartus-programmer an...
guenniause's avatar
guenniause
Icon for New Contributor rankNew Contributor
6 years ago

Hi,

thats a important hint. The IOWR instruction works with 32bit addressing.

That will be my problem.

Thanks,

Guenter.