Forum Discussion

guenniause's avatar
guenniause
Icon for New Contributor rankNew Contributor
5 years ago

Serial Flash Controller II - erase / program issue

On a customer board (Quartus Prime 18.1 / Cyclone 10 LP / W25Q64) I use the Serial Flash Controller II to access the serial flash W25Q64. Programming of the flash with JIC-file/Quartus-programmer an...
guenniause's avatar
guenniause
Icon for New Contributor rankNew Contributor
5 years ago

Hi,

the density of the flash is set to 64Mb (see screenshot).

So the address 0x200000 should be within the size of the flash.

Thanks,

Guenter