Forum Discussion

guenniause's avatar
guenniause
Icon for New Contributor rankNew Contributor
5 years ago

Serial Flash Controller II - erase / program issue

On a customer board (Quartus Prime 18.1 / Cyclone 10 LP / W25Q64) I use the Serial Flash Controller II to access the serial flash W25Q64. Programming of the flash with JIC-file/Quartus-programmer an...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,

You will need to modify your bootloader in order to change the baud rate. We do not have bootloader specially for Generic Serial Flash Interface IP.