Forum Discussion

guenniause's avatar
guenniause
Icon for New Contributor rankNew Contributor
6 years ago

Serial Flash Controller II - erase / program issue

On a customer board (Quartus Prime 18.1 / Cyclone 10 LP / W25Q64) I use the Serial Flash Controller II to access the serial flash W25Q64. Programming of the flash with JIC-file/Quartus-programmer an...
guenniause's avatar
guenniause
Icon for New Contributor rankNew Contributor
6 years ago

Hi,

it is basically possible to boot with Generic Serial Flash Interface IP. I tested it on our customer board.

But it is very slowly.

According User Guide the IP core starts with the slowest baudrate. I guess the standard bootloader boot_loader_cfi.srec does not change baurdrate value.

Is there a bootloader available which changes this value?

Or is the source code of the booloader available?

Thanks,

Guenter