Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Sending data to jtag uart data when no jtag is connected

I have a Nios application which sometimes shows little debug info through jtag uart. Excluding error conditions, debug prints take place only when application starts and whenever a network connection...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

You can probably do:# define printf if (DEBUG_BUILD) printf

then# define DEBUG_BUILD to 1 or 0