Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Qsys Address Mapping Query

I have a Qsys design in which NIOS II data master is connected to Avalon slave of peripheral (Stepper driver). Here the width of the address bus of the peripheral is 3-bits. So, when I assign base ad...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

At your peripheral hw.tcl, check the addressUnits of your Avalon Slave. Make sure that it is SYMBOLS.