Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Problem booting program from EPCS flash and running from SRAM

Hardware and software tools: NIOS II IDE 10.1 ("Legacy") Quartus II 10.1 Device:Arria II GX - EP2AGX260FF35I5N I am using software tools and hardware as described and a custom board.The p...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Following the advice by altera support i have performed a memory test for my external SSRAM-this was the output :

Testing RAM from 0x0 to 0x1FFFFF

-Data bus test passed

-Address bus test failed at address 0x80000