Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Problem booting program from EPCS flash and running from SRAM

Hardware and software tools: NIOS II IDE 10.1 ("Legacy") Quartus II 10.1 Device:Arria II GX - EP2AGX260FF35I5N I am using software tools and hardware as described and a custom board.The p...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

yes,i have checked about thousand times.

Now i have set up an internal small RAM inside the fpga-the program boots from epcs and runs inside the on-chip RAM,so i guess the problem is in the access to external RAM