Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Problem booting program from EPCS flash and running from SRAM

Hardware and software tools: NIOS II IDE 10.1 ("Legacy") Quartus II 10.1 Device:Arria II GX - EP2AGX260FF35I5N I am using software tools and hardware as described and a custom board.The p...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

In SOPC, what are your reset and exception vectors in the NIOS pointing to?

My NIOS values are set to:

Reset - EPCS Controller

Exception - External RAM

(I am assuming you have an EPCS controller block in your sopc project, it is required (normally) for the processor to boot from the EPCS)