Forum Discussion

JanFranken's avatar
JanFranken
Icon for New Contributor rankNew Contributor
3 years ago
Solved

NIOS only boots after nios2-terminal connects

I generate a .jic file and download it into the EPCS64 device. However once the FPGA starts up, the NIOS does not boot. Only when I start the nios2-terminal on the PC does the NIOS boot. Any...
  • JanFranken's avatar
    JanFranken
    3 years ago

    Hi Kelly,

    In our case the solution was to remove the JTAG Debug UART and move the stdout/stdin/stderr to a standard UART.

    The NIOS now boots from startup without waiting for the nios-terminal to connect.

    Thank you,

    Jan.

KellyJialin_Goh's avatar
KellyJialin_Goh
Icon for Frequent Contributor rankFrequent Contributor
3 years ago

Hi,

As we do not receive any response from you on the previous answer that we have provided. Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.

Thank you.


Regards,

Kelly Jialin, GOH


p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 9/10 survey.