Forum Discussion

New Contributor

3 years ago

MAX 10 Execute in Place Dual Image RSU CFM Issue

I have setup a MAX10 08 with dual image design and implemented a software stack to update the CFM1 with a new image. When dual image is enabled memory initiation becomes disabled, so the NIOS II so...

Farabi

Regular Contributor

3 years ago

Hello,

There is note to mention that NIOS II can't erase or write UFM when boot NIOS II with XIP.

link : https://www.intel.com/content/www/us/en/docs/programmable/683689/current/fpga-on-chip-flash-description.html

see Table 28 : "Note: You can not erase or write UFM while XiP in the Intel® MAX® 10."

regards,

Farabi

Forum Discussion

MAX 10 Execute in Place Dual Image RSU CFM Issue

Recent Discussions

Correct way to use mSGDMA with a NIOSV/m processor on a MAX10 FPGA

Nios-V on Cyclone IV

Unable to load Ashling Riscfree NiosV libraries

University Program IP for NiosV

Nios II IDE File Name too long error