Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Implementing Interrupt Vector Custom Instruction in Qsys

Is there a possibility to implement the outdated Interrupt Vector Custom Instruction or any other performant Hardware Interrupt Handler in Qsys? We are using MicroC/OS-II running on a Nios II syst...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

No. It was not possible, because this Custom Instruction was supported until Quartus 13 in SOPC-Builder. My project was launched with Quartus 14 and Qsys.

In fact it is possible to convert the Custom Instruction from SOPC to Qsys, but it was too time-consuming to bring the project back to Quartus 13. My project was too far advanced to do this respectively the use of Interrupt Vector CI was too less important for us.

In the meantime we changed over to openRTOS operating system because of several reasons. OpenRTOS supports Shadow-Register-Set and the VIC-IP_Core. Thus we use the VIC now.