Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Epcs16si8n eol

Hi Guys I see that EPCS16SI8N is being replaced by EPCQ16ASI8N. My boards are using a Cyclone III device so I am still using Quartus 13. Do you know if the new replacement part will work as a d...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi,

according to my previous experience a file formatting tool such as the Convert Programming File in Quartus system supports device families longer than the whole Quartus design system. I was able to load a SOF file for Cyclone III into the Convert Programming File of the Quartus 17.1 (File menu) and create a POF file for an EPCQA device. Perhaps this could be a way for you as well.

Regards,

Martin