Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

EPCQ Bootloader problems

Quartus 15.0, Cyclone V design I'm booting the FPGA from a Micron N25Q128 SPI flash and am trying to transition my NIOS to boot from SPI flash instead of onchip RAM. I've read all of the app n...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Dear Pororo,

Will the /e one be fixed in the Quartus V16.0?

If I want the NIOS II to run in a higher frequency and the EPCQ flash controller in 25 MHz, will the /f meet my requirement?
anvitha's avatar
anvitha
Icon for New Contributor rankNew Contributor
5 years ago

Hi,

I am also facing same issue with nios2 processor,means we are using cyclone v gx fpga board with epcq64n module.

here my .sof (hardware file)is booting from epcq but nios 2 application project is not booting.i am also doing so many experiments from 15 days,no improvement .

please helpto resole this issue

quartus ver .15.0

nios/f selected.

i tried on arrow soc kit also.

no improvement...........................