Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

EPCQ Bootloader problems

Quartus 15.0, Cyclone V design I'm booting the FPGA from a Micron N25Q128 SPI flash and am trying to transition my NIOS to boot from SPI flash instead of onchip RAM. I've read all of the app n...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

The last time I used the EPCS-Core was on an own Cyclone IV-Board with great success.

I am not sure if it is suitable for a Cyclone V...

The last thing I know about Cyclone V, but it was with Quartus 13.1 to 14.1, where I thought I had the same problem. I had hoped, the problems would be gone with 15.0 ?!

Have you tested all kind of cores from Altera related to EPCS/Q-Boot of the NIOS?

If yes, please try to fill out an official Service-Request at Altera.

Kind regards