Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

DE2 board. Flash and sram with NIOS

Hi I have same problem with using sram and flash simultaneously. I use DE2 board. This is how looks like my project. I have 2 address buses but one data bus. And I dont know how connect data bu...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Both connect to tri_state_bridge_data.

I think your flash data port is only 8 bits wide: connect it to tri_state_bridge_data[7..0].

The other data lines connect only to sram