Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Configuring NIOS processor through AS interface

Hi all, I have been searching all day on a solution to my problem, or to find out if I totally screwed up my first design. I designed my own board with a Cyclone II processor and an EPCS4 ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

from http://www.altera.com/literature/ug/ug_nios2_flash_programmer.pdf

--- Quote Start ---

nios2-flash-programmer --epcs --base=0x02100000 epcs_controller.flash

Programs an EPCS device based at address 0x02100000 with input file

epcs_controller.flash.

--- Quote End ---

You should make a service request on Altera web site.

You will have better answers.