Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

boot from S25FL512S

Hi all, I try to boot from QSPI Flash (S25FL512S) but I am having some difficulties. I have the same DDR3 as altera cyclone v soc board + two QSPI S25FL512S connected to the hps side. Inp...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
10 years ago

Hi slesne,

Thanks for the reply.I tried with 0x02100040 as the load address,still i am facing same problem.

The link u have given will be useful in future.

currently I am working cyclone v soc custom board.In board only 3 options are provided(boot from qspi,NAND and FPGA).when ever i try to debug project through DS-5 in boot from qspi flash mode ,it's always throwing following error

Target Message: Could not determine target state

currently i can't debug example projects on board.

Any suggestions are welcome to proceed

Thank you