Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorArrow Cyclone V SoCKit Hard DDR3 Memory controller interface
Hello all, I have a query with respect to the implementation of the Hard Memory controller + UniPHY interface for the Cyclone V SoCKIT development board (https://www.arrow.com/en/products/so......
Altera_ForumHonored Contributor
Honored ContributorHello David,
The 300 MHz might be because the soft memory controller is limited to this speed. Did you try increasing it to 400 MHz using the HMC? It will work if the board is not physically limiting it. Thiago
