Honored Contributor
Honored ContributorHi BillA,
Have you heard from anyone who has had success getting this running standalone on the EP3C120 Development Board with Quartus 9.1 sp2 (under windows)? I have proven by signal tap that the 88e1111 phy is properly communicating with the TSE_Mac (at 100MHz) , and the application generates the following: " Running... INFO : TSE MAC 0 found at address 0x0c000400 INFO : PHY Marvell 88E1111 found at PHY address 0x12 of MAC Group[0] INFO : PHY[0.0] - Automatically mapped to tse_mac_device[0] INFO : PHY[0.0] - Restart Auto-Negotiation, checking PHY link... INFO : PHY[0.0] - Auto-Negotiation PASSED INFO : PHY[0.0] - Checking link... INFO : PHY[0.0] - Link established INFO : PHY[0.0] - Speed = 100, Duplex = Half Waiting for link...OK IP address: 192.168.0.77" But nothing seems to be received. I place a breakpoint immediately after if (p == null) return "ethernetif_input" ... in an attempt to capture a packet being processed but never get there. Any advice would be useful. thanks very much for posting this example ... it is really appreciated!
