Forum Discussion

ymiler's avatar
ymiler
Icon for Contributor rankContributor
5 years ago

VREF

Hi 1) Is there option to define which VREF the FPGA use ? (interal FPGA vref or external IO pin ) If yes - where should I define it in the Quartus 2)Do all the banks should get same ...
ymiler's avatar
ymiler
Icon for Contributor rankContributor
5 years ago

Hi

Thank you for your answer ,

According to the DS there is option to choose which VREF to use , internal or exteranal

Attached screenshot :

But , I dont find any option choose it in the Pin Planner :

Please advise

Yishay

AminT_Intel's avatar
AminT_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hi,

Which version of Quartus are you using?

Thanks

  • ymiler's avatar
    ymiler
    Icon for Contributor rankContributor
    4 years ago

    20.3

    • AminT_Intel's avatar
      AminT_Intel
      Icon for Regular Contributor rankRegular Contributor
      4 years ago

      Hello,

      When you click on that GUI in the Pin Planner it will show you the pin location on tab on your right. You can set your fitter location to that pin at the bottom of the Pin Planner GUI.

      Thank you.

      • AminT_Intel's avatar
        AminT_Intel
        Icon for Regular Contributor rankRegular Contributor
        4 years ago

        We do not receive any response from you to the previous question/reply/answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.