Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Using SODIMM DDR2 module on Cyclone 3

Hi All, Hope someone can help. I'm just trying to establish the feasibility of using a SODIMM memory DDR2 memory module (e.g Micron MT16HTS25664H) with a Cyclone III FPGA (EP3C40F484C6 o...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

I've used SODIMM with Arria, but I understand from the IP manual, that Cyclone III DDR2 interface with 64 data lines (8x8) can be realized. I'm not sure, if it's possible with the F484 package. The most simple way to find out is starting a test design, I think.