Forum Discussion

FHint's avatar
FHint
Icon for Occasional Contributor rankOccasional Contributor
4 years ago
Solved

Unable to read data from flash via Generic Serial Flash Interface (only zeros)

Hello, in my current Arria 10 GX design I have one small Micron flash for the FPGA binary (MT25QU256ABA1EW9, 32MByte) and two larger Micron flash devices (MT25QU01GBBB1EW9, 128 MByte each) for rand...
  • FHint's avatar
    FHint
    3 years ago

    Hello,

    thank you for the reply. It isn't necessary to check the project anymore, because it now works.

    The problem was solved by switching from version 19.1 to 21.1 of the Quartus Prime Standard software.

    Best Regards,
    Florian

Farabi_Altera's avatar
Farabi_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hello,


Good to hear that your design works at 21.1. The bug must have been fixed in 21.1.

I will file kdb to share with others, to help other customers.

If there is no further question, please let me set this case to close pending.


Thank you,

Farabi