Forum Discussion
FHint
Occasional Contributor
Occasional ContributorUnable to read data from flash via Generic Serial Flash Interface (only zeros)
Hello,
in my current Arria 10 GX design I have one small Micron flash for the FPGA binary (MT25QU256ABA1EW9, 32MByte) and two larger Micron flash devices (MT25QU01GBBB1EW9, 128 MByte each) for rand...
Hello,
thank you for the reply. It isn't necessary to check the project anymore, because it now works.
The problem was solved by switching from version 19.1 to 21.1 of the Quartus Prime Standard software.
Best Regards,
Florian
Farabi_Altera
Regular Contributor
Regular ContributorHello,
I am sorry for late reply. Yes, I need a project that includes the component that interacts with the GSFI is sufficient.
regards,
Farabi
FHintOccasional Contributor
Occasional ContributorHello,
thank you for the reply. It isn't necessary to check the project anymore, because it now works.
The problem was solved by switching from version 19.1 to 21.1 of the Quartus Prime Standard software.
Best Regards,
Florian
