Forum Discussion

RHobb's avatar
RHobb
Icon for Occasional Contributor rankOccasional Contributor
3 months ago
Solved

Unable to install kernel driver for testing PCI Express

I'm referencing the L-Tile and H-Tile Avalon MM+ Intel FPGA IP for PCI Express User Guide (2024.09.13). On page 19 and after compiling the design example, it wants the user to install the Linux kern...
Pcie
  • VenT_Altera's avatar
    VenT_Altera
    3 months ago

    Hi Embeddedesigner,


    Thank you for the updates.

    Device configuration is outside of my area of expertise.

    Could you please file a new post in the forum regarding your configuration issue? The device configuration support expert will be able to assist you with this issue.


    Thanks.

    Best Regards,

    Ven


RHobb's avatar
RHobb
Icon for Occasional Contributor rankOccasional Contributor
3 months ago

I want to close this thread as an acceptable answer, but I have encountered another more serious problem.

I will also go back and fix the updated kernal API drivers manually to fix the issue. The issue I'm having is actually programming my board, after I successfully generated the design example, compiled, set the .qsf file settings to the recommended pin assignments in the design example folder. It keeps stopping at 80% and outputs this error message:

Error(18950): Device has stopped receiving configuration data
Error(209012): Operation failed
Error(18948): Error message received from device: Device is in configuration state.

There is an internal Bug ID: 1508562679 that addresses this known issues with the Stratix10 fpga which states :

Resolution

This problem is fixed starting in Intel® Quartus® Prime Pro Edition Software version 20.4.

I have a running reference clock assigned, which is provided on the Terasic Apollo S10 SoM.

Can you assist in a solution?