the points are mentioned below

Dear Sir,

just before 15 days we got ARRIA10GX development kit .

1.We connected bitec FMC HDMI connector RECEIVER sink to PC GPU GTX1050.

and connected 4k tv to the transmitter side.

when we loaded the precompiled sof file to the kit --- in nvide control panel its detecting the arria10gx card. but there is no display on source -4K TV.

we installed quartus prime 17.1 pro and the desing is

AN 776: Intel® Arria® 10 UHD Video Reference Design.

2. we have to use HDMI RX AND TX IP CODE DDR4 MEMORY WITH SOME LOGIC TO BE IMPLEMENTED IN THE CODE . I know vhdl language. not familiar verilog.

also not familiar with NIOS2 . SO FOR IMPLEMENTATION OF OUR LOGIC

3. the fpga is arria10gx a10x115S24I1SG

BITEC HDMI FMC DAUGHTER CARD REV 11

Quartus pro 17.1 we are using .

4. for daughter card rev11 any of quartus pro edition will work ?

WHICH IP CORES I HAVE TO USE .