Forum Discussion

sateesh999's avatar
sateesh999
Icon for New Contributor rankNew Contributor
2 years ago
Solved

support for implementing ethercat in fpga

Hi , i am new to industrial protocol ,currently i am implementing the ether CAT Slave in cyclone 10 FPGA.i need some details on regarding reference designs ip core examples. Could you please can...
Ethernet
  • ZiYing_Intel's avatar
    ZiYing_Intel
    2 years ago

    Hi,


    I now transition this thread to community support. The community users will continue to help you on this thread.


    Best regards,

    zying



ZiYing_Intel's avatar
ZiYing_Intel
Icon for Frequent Contributor rankFrequent Contributor
2 years ago

Hi,

To implement the design, you may refer to our design example. To get the design examples, you may visit to our FPGA Design Store in link below https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-examples/design-store.html

Besides that, you may visit to the RocketBoards in link below https://www.rocketboards.org/foswiki/Main/WebHome . RocketBoards got a lot of source and example design that you may refer to.

Best regards,

zying


FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
2 years ago

Hi,
as far as I'm aware of there's no other EtherCAT IP on the market than Beckhoff products. They are also providing examples, test benches etc. As expectable, there are no examples in Intel design-store. What are you exactly searching for?

Particularly I don't think there's any free EtherCAT FPGA IP, but may be I overlooked it yet.

By the way, crosspostings are not allowed or at least unwanted on any Internet forum. Be sure your questions are heard when you post them once.

  • sateesh999's avatar
    sateesh999
    Icon for New Contributor rankNew Contributor
    2 years ago

    Hi,

    Thanks for your information and immediate response to my question ,i will move forward with your inputs

    Thanks

    Sateesh