Forum Discussion

HBhat2's avatar
HBhat2
Icon for Contributor rankContributor
6 years ago

Stratix 10 - Native PHY - Hard PRBS Configuration

Hi, We are validating Stratix 10 SoC Dev kit with our custom FMC card @ 10G & 20G speed. We are using transceiver toolkit & the hard PRBS patterns to capture the eye. We got the polynomial info fro...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi HPB,

Regarding the TX line toggling, I do not have detailed information on this. However, based on my experience with previous device families, by default, the TX will send out clock pattern when it is not transfering out PRBS pattern. Not sure if you are observing clock pattern as well from the S10 TX in TTK?

Please let me know if there is any concern. Thank you.

Best regards,

Chee Pin