Forum Discussion

Bin_Wang's avatar
Bin_Wang
Icon for New Contributor rankNew Contributor
4 years ago

SDI TX XCVR Failed to work

Hi, I am using the C10 GX105YF708 for SDI project. For unknown reason, when I have both HDMI+SDI Tx core in the project. The SDI tx_pll_locked and gxb_tx_ready will stay low.. HDMI TX core...
Bin_Wang's avatar
Bin_Wang
Icon for New Contributor rankNew Contributor
4 years ago

Dear CheePin,

I have tried to compile the project in Quartus 21.2pro, but there are some error occurred. The project was set up in Quartus 19.2pro.

The error listed:

1)More than 1 positional argument specified:,0.299...

2)ERROR: An erroroccurred during automatic periphery placement...

I don't know whether some env need to change when using 21.2pro.

So I attached the project, could you help to give some suggestion?

Thank you.

Please refer to following link:

community.intel.com/t5/FPGA-Intellectual-Property/SDI-TX-XCVR-Failed-to-work/m-p/1320318#M24816