Forum Discussion

alexforencich's avatar
alexforencich
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

100G E-Tile transceiver adaptation

I am having trouble getting the RX side of the link working with the E-Tile in 100G mode on an Agilex F 014 part (DE10-Agilex board). I previously had a similar issue with the E-Tile in 10G and 25G ...
Kshitij_Intel's avatar
Kshitij_Intel
Icon for Frequent Contributor rankFrequent Contributor
3 years ago

Hi Alex,


Can you please share which OS and Quartus version you are using.

Also, Please confirm your target device AGFB014R24B2E2V.

It would be good if you can share your project .qar.


Thank you

Kshitij Goel



alexforencich's avatar
alexforencich
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

OS is Linux. I am currently using Quartus Prime Pro 22.1, as 22.2 is broken (see https://community.intel.com/t5/Intel-Quartus-Prime-Software/PCIe-HIP-clocking-regression-on-Stratix-10-MX-in-Quartus-Prime/m-p/1394323#M74234). You guys sent me a DE10-Agilex rev B instead of a rev C, so I have an ES part (AGFB014R24A2E2VR0) instead of a production part (AGFB014R24B2E2V).

The code is here: https://github.com/alexforencich/corundum/tree/master/fpga/mqnic/DE10_Agilex/fpga_100g

I'll generate a QAR soon.