Forum Discussion

xiangxufu's avatar
xiangxufu
Icon for New Contributor rankNew Contributor
5 years ago

IFFT

Dear sir, I encountered the following problems when using FFT IP core to simulate My FFT IP core configuration is as follows.I configure it as IFFT. In the case of entering the same data, ...
General
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


Thanks for your update. For your information, in the FFT IP, you can generate the example test bench from IP -> Generate -> Generate Example Design -> ... Design. It is recommended for you to generate and refer to the example test bench. You may pay attention on the msim_setup.tcl file is generally used to compile all the required files for the FFT IP simulation.


Please let me know if there is any concern. Thank you.



Best regards,

Chee Pin