Forum Discussion

meitalr's avatar
meitalr
Icon for New Contributor rankNew Contributor
3 years ago

I3C IP

Hi, 1. Does INTEL has an IP for I3C protocol? 2. Can i use Cyclone iV or V for implementing I3C interface? Thanks, Meital
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi,


As of today, we have no I3C designs or documentation available, unfortunately the answer to your questions would be no.


I have found a 3rd party that have an IP design using I3C by CAST, you may shift your contact to them:

https://marketplace.intel.com/s/offering/a5b3b0000000zgNAAQ/i3cs-mipi-i3c-basic-slave-controller


Also, I can check again with our internal team, please allow me around 2-3 days and get back to you.


p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.


  • meitalr's avatar
    meitalr
    Icon for New Contributor rankNew Contributor
    3 years ago

    Thanks a lot!

    Please check again with your internal team. I will wait.

    Please reply to my second question. Does Cyclone iV is good enough to use for I3C implementation. Since it support 1.8V and my I3C interface is 1.8V i assume it is possible.

    Please advise,

    Thanks,

    Meital

  • meitalr's avatar
    meitalr
    Icon for New Contributor rankNew Contributor
    3 years ago

    Thanks for the third party, but i need master slave controller.

    Do you have any IP of master slave one?