Forum Discussion

New Contributor

7 years ago

How to generate the flash.pof file in PFL?

I am trying to implement PFL IP in my project. I am using a CPLD to configure FPGA using 128Mb flash . For this I first have the CPLD code compiled. This generated a CPLD.pof file. After this I insta...

Vicky1

Regular Contributor

7 years ago

Hi,

Programming of the flash device can be done by two methods refer the below application note,

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an478.pdf

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

Best Regards

Vikas Jathar

(This message was posted on behalf of Intel Corporation)

Forum Discussion

How to generate the flash.pof file in PFL?

Recent Discussions

MCDMA IP D2H Queue Reset Failure during Channel Re-allocation

PCIe Hard IP - Can 'valid' De-assert Between SOP and EOP During DMA Read Completion?

Regarding MIPI CSI 2 TX

Display port TX SST not working.

Agilex3/5 GTS Hard Ethernet IP 10G example design pin loc and io std wanted