help!!!

when I want the hardware to test my program, I encountered some problems when downloading:

the problem :file c:/documents and settings/ofdm/ofdm_sch_time_limited.sof contains one or more time_limited megafunctions that support the opencore plus feature that will not work after the hardware evaluation time expires.refer to the messages window for evaluation time details.

how can i solve this problem? thanks for your time!!!

thank you again for you timely reply !I can reuse it after having disconnected the cable, but I will need to upload my design into the FPGA again first.so I need to download my program to the device(EP1C12Q240C8),but I don't need to download the IPcore from the ALTERA website again?is that right?can i use it without connect the internet?

thank you !

You don't need to ask 5 times the same question.

What you see isn't an error. You see this because you didn't pay for the licenses of some of the IP that you are using, As I said, this doesn't prevent the system from running and you from doing your tests.

Once the system is compiled into a sof file, you can upload it as many times as you want and when you want to your FPGA. All you need is the Quartus programmer software, and you can use it without any Internet connection.

--- Quote Start ---

You don't need to ask 5 times the same question.

What you see isn't an error. You see this because you didn't pay for the licenses of some of the IP that you are using, As I said, this doesn't prevent the system from running and you from doing your tests.

Once the system is compiled into a sof file, you can upload it as many times as you want and when you want to your FPGA. All you need is the Quartus programmer software, and you can use it without any Internet connection.

--- Quote End ---

thank you for you kind reply,thank you !

I still hava a quertion about the opencore ip .I recently installed a network version of quartus, but there is only the FFT IP core, Why there do not have IFFT IP core?or where can I find it?thank you !

thank you for you kind reply,thank you !

I still hava a quertion about the opencore ip .I recently installed a network version of quartus, but there is only the FFT IP core, Why there do not have IFFT IP core?or where can I find it?thank you !

http://www.alteraforum.com/forum//proweb/misc/progress.gif