Forum Discussion

amildm's avatar
amildm
Icon for Contributor rankContributor
3 years ago
Solved

[HDMI-IP] Cyclone 10 -> only FRL=0 available? HDMI v2.x not supported?

Hi All, I'm using the Intel HDMI-IP in Cyclone-10 (Quartus v19.3). Does the IP support HDMI v2.x ? According to the page #4, the FRL is available for Arria-10 only. Here is from UG page4 of the ...
  • ZH_Intel's avatar
    ZH_Intel
    3 years ago

    Hi amildm,

    Good day.

    Yes you are correct.

    HDMI IP does support HDMI 2.1(FRL) but the final support is only for Arria 10 device.

    I'm afraid Cyclone 10 does not support HDMI 2.1 at the moment.

    You may refer to below link for more information:

    HDMI Intel® FPGA IP User Guide - 2.3. Feature Support

    Thank you.

    Best Regards,

    ZulsyafiqH_Intel

ZH_Intel's avatar
ZH_Intel
Icon for Frequent Contributor rankFrequent Contributor
3 years ago

Hi amildm,

Good day.

Yes you are correct.

HDMI IP does support HDMI 2.1(FRL) but the final support is only for Arria 10 device.

I'm afraid Cyclone 10 does not support HDMI 2.1 at the moment.

You may refer to below link for more information:

HDMI Intel® FPGA IP User Guide - 2.3. Feature Support

Thank you.

Best Regards,

ZulsyafiqH_Intel