Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

dsp builder installation

i have purchased cyclone II DSP development kit EP2C70.

there is an installation issue with DSP Builder v6.0 (dsp builder CD provided with the kit).

i have install Quartus II version 6.0sp1 (provided with the kit)

megacore IP v6.0 (provided with the kit).

Nios II v6.0 (provided with the kit).

when i try to install DSP Builder then message window appear "install matlab 7.0 , 7.1 or 2006a before installing dsp builder"

although matlab 2007b is provided with the kit, and i have already install this in my PC.

i have also installed matlab 7.0 but the same error message window appears every time.

please help me in the installation of dsp builder v6.0

17 Replies

Show More
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    DSP Builder never generates Verilog.

    edit: Change that to present tense. No idea if it will at some future point.
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    i have download modelsim-altera 6.1Ed from the altera web side.

    when i tried to open then message window appear with the license issue.

    "the environment variable for modelsim-altera is not set, give address in the following preferrance"

    1. MGLS_LICENSE_FILE

    2. LM_LICENSE_FILE

    please help me
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    I recommend posting this in a new thread. This is nothing to do with DSP Builder and so it may not get the attention you would like.

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    I have Tried "My support " in ALTERA Webpage.But i cant figure it out.

    Can anyone please instruct me How to Obtain a DSP Builder Free License. I owned the Cyclone III(NEEK) kit. I need badly to obtain the license... Thanks in Advance...
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    15 years ago

    You should contact your local Altera reprentative to see if they can do something for you. AFAIK the NEEK kit doesn't give you a DSP builder license.

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    Thank you for your reply Daixiwen,

    I never know that NEEK doesn't cover the DSP license.

    But my CD package Has the DSP Builder software.

    I tried to contact ALTERA customer support through Mail, But they are asking for my University Mail address. but i don't have one. Is there no way to get a reply from ALTERA without a Registered University MAIL ID.
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    14 years ago

    And the SERIAL NUMBER i got in MY NEEK Kit has 19 digits rather then the 11 digit instructed by ALTERA references for KIT registration. Is it common ?

    I checked my NEEK, DE0 and DE1 boards all are having a 19 digit serial number at the bottom of the Shipping KIT sticker.

    Did i misunderstood the directions given by ALTERA? , please guide me..