Forum Discussion
mfortuna
New Contributor
New ContributorDDR4 Problem Migrating from Arria 10 016 to 048
We have a board design that supports an F29 package Arria 10. It has two DDR4 interfaces running at an 1866 data rate. In the past an 016 chip with DDR4-2400 ICs worked fine. We needed more logic s...
yoichiK_altera
Contributor
ContributorI can think of the cause is only power capability issue across migration devices. Especially static power will increase from 016 -> 048 density. Do you use the single DDR4 example design to see the calibration result ?
