Forum Discussion

JBayl's avatar
JBayl
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Cyclone 10Gx PCIe Hard IP Avalon access speed

Hi, We upgraded our old PCIe Gen 1 board (NXP's PX1011B and Cyclone III) to a Cyclone 10Gx based board with the Hard IP configured at Gen2 64-bit 125Mhz. We've maintained the same SW (windows...
JBayl's avatar
JBayl
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Hi dlim,

This may be off topic but is there another way of interfacing to the PCIe Hard IP other than the Avalon Bus?

Our SW team is looking at possible ways of increasing the Avalon bus speeds but we are currently unsuccessful. We're looking at increasing the Avalon bus to 64 bits as a last resort.

Thanks!