Forum Discussion

Michael2021's avatar
Michael2021
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Cyclone 10 GX DisplayPort Rx

Hello dlim, I modified the custom Dipalyport Receiver board. The Modified point is CLKUSR pin only DisplayPort Receiver function still doesn't work. I attached two picture. Picture 1 : cy...
Michael2021's avatar
Michael2021
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

I removed the repeater chip control (using PIC Controller firmware : was blocked training sequence)

and DP rx_serial_input port was assigned reverse (But Still I can't understand)

Now my custom board works good.

My next concern is how to increase 8.1G data rate. There is no option in Non GPU DisplayPort mode (Max 5.4G)

Thank you

Michael