Forum Discussion

Michael2021's avatar
Michael2021
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Cyclone 10 GX DisplayPort Rx

Hello dlim, I modified the custom Dipalyport Receiver board. The Modified point is CLKUSR pin only DisplayPort Receiver function still doesn't work. I attached two picture. Picture 1 : cy...
Michael2021's avatar
Michael2021
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Hi

Thank you for recommending

I didn't use any voltage reference differcial IO. only 1.8V, 3.0V LVMOS and LVDS. So I will tie all VREF to GND. I didn't tie it to GND all other design I did before.

Thank you

Michael