Forum Discussion

alin84_gtri's avatar
alin84_gtri
Icon for New Contributor rankNew Contributor
1 month ago

CORDIC ATan2 Failed to Generate

I am using Quartus Prime Version 23.4.0. I attempted to generate a CORDIC ATan2 IP with the following parameters, as shown in screenshot. However, I get the following error message: Error: CORDIC_0:...
Other Ips
alin84_gtri's avatar
alin84_gtri
Icon for New Contributor rankNew Contributor
1 month ago

Hi Richard. Thanks for looking into this issue with me. We are trying to add our own IP into a reference design provided by our vendor. Since our vendor's reference design is locked to Quartus 23.4.0, we are unfortunately stuck with using this version as well. If possible, could you see if you can replicate my error with 23.4.0, targeting Agilex 7 AGMH039R47A1E2V ? Thank you.

RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
27 days ago

Hi alin84_gtri 

If a patch is required, please contact your local authorized distributors and provide the necessary business justification (this is required). Otherwise, please work with the vendor to upgrade the design to a later Quartus version.
We will continue to monitor this post for the next 5 days. If there are no further inquiries during this period, I will step back and allow the community to assist with any future follow-up questions.

Thank you for engaging with us!

Best regards,
Richard Tan