Forum Discussion

alin84_gtri's avatar
alin84_gtri
Icon for New Contributor rankNew Contributor
3 months ago

CORDIC ATan2 Failed to Generate

I am using Quartus Prime Version 23.4.0. I attempted to generate a CORDIC ATan2 IP with the following parameters, as shown in screenshot. However, I get the following error message: Error: CORDIC_0:...
Other Ips
RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
3 months ago

The error can be reproduced in Quartus Prime Pro 23.4. Could you please ask the vendor to provide or upgrade the reference design to a newer Quartus version?
Based on our testing, the issue is resolved in Quartus Prime Pro 24.1.
Unless there is a strong business justification, it is unlikely that a patch will be issued for this issue, as it has already been addressed in later Quartus releases.
Sorry for the inconvenience caused. 

Regards,
Richard Tan

RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
2 months ago

Hi alin84_gtri 

Do you have any further inquiries regarding this thread? 

Regards,
Richard Tan