Forum Discussion
rsing108
Occasional Contributor
Occasional Contributorcan't program stratix 10 GX with pcie hard ip+ example design
I am getting the following errors while programming the Stratix 10 GX board with the PCIE hard ip+ example design.
quartus_pro 19.4
Error (18950): Device has stopped receiving configuration data ...
rsing108Occasional Contributor
Occasional ContributorHi @SengKok_L_Intel ,
I changed the refclk pin to the same as the vendor one and also changed the rest of the pins according the vendor's pin configuration. But there is still an error while programming the board:
Error(18952): Error status: Device does not accept configuration request
rsing108Occasional Contributor
Occasional ContributorHi @SengKok_L_Intel ,It seems I need to get the server rebooted first. I will update you once I get it rebooted.
