Forum Discussion

Shwetha_G_S's avatar
Shwetha_G_S
Icon for New Contributor rankNew Contributor
3 years ago

Bus error during booting into FPGA Hardware

We use "10AS048E3F29I2SG" (Arria 10) device. While booting the fpga hardware, in serial prints following bus error is coming Fail: noc_idleack = 0x01110111 mask_noc = 0x00100111 Kernel imag...
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi


I see that there are lots of GPIO related errors.

Are you creating the bitstream in reference of the GHRD?

If yes, did you update the settings in the pin planner to the custom board you are using?


Sorry to inform you that, I am taking annual leave next week.

Please expect some delay in my reply.


Thank you very much in advance!


Regards

Jingyang, Teh


  • Shwetha_G_S's avatar
    Shwetha_G_S
    Icon for New Contributor rankNew Contributor
    3 years ago

    Hi,

    We are not using bitstream in reference of the GHRD.

    We are U-boot version 2014.10

    Kindly give a solution