Arria 10 GX - RSU (Remote System Update) over PCIe - "Memory at <unassigned>" issue

Hi,

Apologize for the delay in respond as I did not received notification for your reply.

After looking over the output that you get after the command, I can see that the your Kernel module is altera_cvp.

Which is different from the design example given, the Kernel driver should be RSU over PCIe.

Hence, please make sure to check that you have only install the driver RSU over PCIe from the design example. Try the image given in the design example before you use your own image.

01:00.0 Unassigned class [ff00]: Altera Corporation Device e001 (rev a5)

Subsystem: Device a106:2484

Flags: fast devsel, IRQ 11

Memory at <unassigned> (64-bit, prefetchable) [disabled]

Capabilities: [50] MSI: Enable- Count=1/4 Maskable- 64bit+

Capabilities: [78] Power Management version 3

Capabilities: [80] Express Endpoint, MSI 00

Capabilities: [100] Virtual Channel

Capabilities: [200] Vendor Specific Information: ID=1172 Rev=0 Len=044 <?>

Capabilities: [300] Secondary PCI Express

Capabilities: [800] Advanced Error Reporting

Kernel modules: altera_cvp

Regards,

Aiman