New ContributorHi,
I'm using AGFB014R24B2I3V device in my custom project. Generated hardware design by following TSE Onboard PHY chip reference design. To test SGMII interface for PHY 88E1512 using TSE IP, tcl script was executed, but getting error as attached snapshot.
Is there anything I'm missing out here. Kindly help us to resolve this issue asap.
--
Regards,
Frequent ContributorHi,
Is there any chance you have more than one device on JTAG and the index of 0 needs to change?
Best regards,
zying
New ContributorHi,
There is only one device with only master as attached snapshot.
--
Regards,
New ContributorHi,
Is there any update on this?
--
Regards,
Frequent ContributorHi,
May I know you are using which quartus version?
Best regards,
zying
Frequent ContributorHi,
Could you share .qar file? So that I can debug the issue from my side.
Best regards,
zying
New ContributorHi,
Could you please share your mail ID to share qar file?
--
Regards,
New ContributorHi,
Shared qar file, please go through it and keep me updated if you have any findings.
--
Regards,
Frequent ContributorHi,
We wanted to inform you that our offices will be closed from 10April to 15April in observance of the upcoming holiday. During this time, Please expect a delay response.
Sorry if there is any inconvenience causing to you.
Best regards,
zying
Frequent ContributorHi,
According to the issue that you are facing, there are a lot of situations that might cause it happen such as maybe you are using multiple cable, multiple JTAG, multiple CPU, multiple host and got error in the tcl. I would suggest you to connect with single cable and single host if you are using multiple cable and host. Besides that, you also need to check back your tcl whether got any error in the tcl file since the error was occur after the "Starting TSE MAC Configuration System Console".
Best regards,
zying
New ContributorHi,
I'm using single cable, single JTAG, single CPU, single host. Now it is getting stopped at a line as attached image.
--
Regards,
Frequent ContributorHi,
I now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread.
Best regards,
zying
New ContributorHi,
Is there any updates on this issue?
--
Regards,
