Forum Discussion

ChanceG's avatar
ChanceG
Icon for New Contributor rankNew Contributor
5 years ago
Solved

XCVR_ANALOG_SETTINGS_PROTOCOL XAUI

Hello- I have unsuccessful trying to find out exactly what analog settings the Subject QSF setting enables (the RX side in particular). Is that in the fitter report? If so, I found a section that...
  • CheepinC_altera's avatar
    CheepinC_altera
    5 years ago

    Hi,


    Regarding to your inquiry on the DFE, as I understand it from the V-Series Transceiver PHY IP Core User Guide, the SV DFE is configured through registers in user mode but not QSF assignment. This could explain why you are not seeing DFE related parameters in the Fitter report. You may refer to "Transceiver Reconfiguration Controller DFE Registers" in the user guide for further details on how to configure the DFE registers.


    Please let me know if there is any concern. Thank you.



CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
5 years ago


Hi,


Thanks for your update. For your information, as I search into the SV handbook and XCVR PHY user guide, I am unable to locate any specific info on the "Equalization Bandwidth Selection". I believe this is an internal setting auto-configured by Fitter.


Please let me know if there is any concern. Thank you.