Forum Discussion

Honored Contributor

13 years ago

wrong device ID by auto-decect in Quartus2

Hi everybody! I'm Trying to program EP4SGX180 device in JTAG inderect mode,but I got the error as follows: Error: Can't configure device. Expected JTAG ID code 0x024210DD for device 1,but fo...

Altera_Forum

Honored Contributor

13 years ago

You may have assigned a different device in Quartus compared to what you are programming:

http://bsdl.info/details.htm?sid=958a96809e5673c588ca59b002289d77

http://bsdl.info/details.htm?sid=6d7b89a0cec9f33a88ca59b002289d77

Forum Discussion

wrong device ID by auto-decect in Quartus2

Recent Discussions

Trouble Getting started with Stratix 10 SOC

Bidirectional pin USB_RX with a pseudo-differential I/O standard must use the OEIN port of the node

Obsolescence issues

Request for COO info

RoHS declaration of 10M50DDF256C8G