Forum Discussion

Honored Contributor

8 years ago

Windows 10 driver support for USB Blaster ?

In reviewing the drivers download page it appears there are NO drivers for Windows 10 for the USB based Blaster programmer cables. Is this really true ?

Fancellu

New Contributor

5 years ago

@fdsa98 Try these older signed drivers

signed-usb-blaster.zip620 KB

Depka

New Contributor

5 years ago

When i completed the Quartus lite 20.1 installation, i got an error in the driver wizard . Can some one help me resolve this?

TScho16
New Contributor
5 years ago
I had the same problem. Finally, i solved it by installing a driver of a previous Quartus version. I used the driver of the following site:

http://www.terasic.com.tw/wiki/File:Usb_blaster_q16.1.zip

The site is linked here:

http://www.terasic.com.tw/wiki/Altera_USB_Blaster_Driver_Installation_Instructions
Fancellu
New Contributor
5 years ago
Look back up the thread.

Latest intel usb blaster drivers are not signed.
Depka
New Contributor
5 years ago
I tried using the above drivers but got the same error .

Forum Discussion

Windows 10 driver support for USB Blaster ?

Recent Discussions

MAX10 Dual Configuration

Cyclone I (EP1C3) Configuration Issues: Sequence and Environment Dependent Failures

EMIF Pin Assignment for Agilex 7 FPGA I-Series DevKit (DK-DEV-AGI027R1BES)

Quartus Prime Pro 25.1 fatal error during fitter: Windows "Efficiency mode" required

Step Load conditions