Forum Discussion

Vijayn's avatar
Vijayn
Icon for New Contributor rankNew Contributor
5 years ago

Weak pullup during MAX10 FPGA configuration

Hi, In my custom board with MAX10 FPGA mounted, after power-on the board, there is a 700mV seen on the pin J1 DIFFIO_RX_L19n for around 5 milli second. I understood that this due to the weakpull-up...
YuanLi_S_Intel's avatar
YuanLi_S_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


Apologize that the weak pull up cannot be disabled during Read ICB Settings.


Thank You